VPN Command

sed -i -e 's/mppe .*/mppe required,stateless/' /tmp/pptpd/options.pptpd

Milkfish on DD-WRT

Step by Stem installation for Milkfish on Linksys WRT 54GL

NOTE

ONLY DESCRIBES THE MILKFISH INSTALLATION BELOW

YOU NEED TO CONFIGURE THE ROUTER FOR WAN / WIFI / LAN ETC.

Pre-Requsits

1. Linksys WRT 54GL (may work with any DD-WRT Compatible Router)
2. dyndns account

3. Register in Milkfish Forum

Download the DD-WRT Firmwares :-

Mini Generic (Base Firmware)

VoIP Generic (Milkfish firmware)

VPN Generic (VPN Firmware - Only if you need to access SIP from out side (WAN))

Step :1
Connect to the Linksys Wrt54gl. for e.g. http://192.168.1.1

Browse --> the Mini Generic Firmware & Upgrade
Re-Connect after reboot
Step :2

Go to the firmware upgrade below Administration and upgrade to "VOIP Generic" firmware which downloaded.

Re-Connect after Reboot

Step :3
Go to the services --> Miskfish SIP Router and settings as follows

Main Switch : Enable

From-Substitution : Enable

From-Domain : "your dyndns name"

Milkfish Username : "your milkfish forum username"

Milkfish Password : "your milkfish forum password"

then SIP Databases

Click on Local Subscribers : Add as many SIP ID's you want

Save & Apply Settings

SIP Phone Settings :-

Proxy : "your dyndns name"

Use Outbound Proxy : Yes

Outbound Proxy : for eg. 192.168.1.1

User ID : for eg: 101

Password : for eg: 101

Note :

If your are using the SIP over the internet you need to use a VPN client. (Upgrade the VPN Generic firmware to the dd-wrt VOIP)